|
| |
Rock Signage |
|
 |
Main rock is 6 ft high, 9 ft wide; 2 castings in front are LP5 & LP6. |
|
 |
The LP5 casting is 5 ft high and 6 ft wide. Freestanding unit with plaster finish on back. Weighs about 350 lbs. Can also have signage or street number embedded in front face. |
|
|
|
Stains |
 |
Color Palettes |
|
Desert Brown / Antique |
|
Rust / Orange Brown |
|
La Cresenta / Reddish Brown |
|
Golden Sand / Tan Base |
|
|
|
Stains
RicoRock® Stains are semi-transparent acrylic stains that are specially formulated for our products. This new line of stains is superior to the paints and chemical stains used by others in the industry. No special training is needed to use these stains; use a simple quart sprayer and do not add water. For stronger colors spray the color on a dry surface. For a softer color, wet the rock surface before adding the color. Sponging excess color and drips is typically done.
These stains are not intended to recolor artificial rocks that have very strong colors, paints with more pigment and someone with experience needs to do custom rock coloring. You do need to shake the stain before and during spraying. Our modular products come with general gray tone colors with some rust highlights. If you want stronger colors or more earth tone colors you can purchase these stains in quart, gallon or 5 gallon containers. Four ounce touch-up kits are also available. Four standard colors: Desert Brown/antique. Used to age or darken. Golden Sand/tan base. Used for earth tone colors or to soften dark areas. Rust/orange brown. La Cresenta/reddish brown. |
|
|
RicoRock® Waterproofing |
|
 RicoRock® Waterproofing
RicoRock® Waterproofing is a cementious coating used for waterfalls and waterline rockwork, applied before the finish texture. Each 5 gallon pail has 50 pounds of powder that is mixed with water and applied with a wide brush. This waterproofing can be used on a variety of concrete surfaces and is designed to mix easily, set quickly, and has a modified polymer to improve bonding--no liquid acrylic agents are needed. |
|
|
Texture Mats & Release Agents |
|
 Texture Mats
Texture Mats are available in 2 sizes: 12inch by 12inch for vertical areas, used to texture exposed mortar between castings on custom jobs and also 24inch by 24inch to texture concrete for rock decks. Release agent is available in powder form and other release agents, liquid or dry, can be used. |
|
|
RicoCement |
|
RicoRock® Cement
RicoRock® Cement is now available, 80 lb bags of type S cement. It dries the same color as RicoRock® casting so if it's used for finish textures the coloring should not require a base coat. It has polymer additives that make it bond better with less shrinkage and fewer calcium deposits. |
|
|
|
|
|
|
